Installation Instruction
2022-01-29 06:11:06
Please click to download: [download id="5668"]
i.Install UbiBotOPP
a Double click “UbiBotOPP Setup”.
b Select setup language, click [OK].
c Confirm the installation path, the default installation path for the programme is "C:\UbibotOpp", then click [Next].
d Set the server port, then click [Next].
e Select additional tasks and click [Next].
f Click [Install].
g Click [Finish].
ii.Privatization Environment Parameter Setting
a Open the browser and go to http://127.0.0.1/.
b Upload the license which download in the App Center, click [Next].
After the upload, the key information will be shown on the page.
c If no special setting is needed, please click [DB Link Test] to check whether the database is connected. Click [Next].
After click [Reset database], please click [DB link test] again to confirm the database link is successful.
d Set website related information, you can set the name, logo and background image. Click [Next].
e Set the system setting like default timezone, language, account, etc.
f If you need to use the email alert function (not supported in the free version), please set up the Mail Server Settings (server for sending alert emails). Click [Finish], then it will jump to the console platform.
Please check with the mail service provider you are using for the relevant settings. Here is an example, the relevant settings are as follows.
i.Install the CH340 driver
a Double click “CH341SER”.
b Click [Install].
ii.Install PC Tool
a Double click “PcToolsIO Setup”.
b Click [Install].
c Click [Finish].
iii.Activate device
Please ensure that the device to be activated is not bound. If not, restore the factory setting of the device first.
a Double click PC Tool.
b Connect the device to the computer with a USB cable.
c Click [Server Setup].
d Click [Start].
e Enter the host, port and backup IP, then click [Next].
f WiFi setup. Choose the network, set the Network SSID and password, then click [Start Setup]. After the setup, the device will be shown in the console platform.
Access http://127.0.0.1/ (local server only) or the specified host address, such as http://192.168.2.34.
The username and password are set in the system settings.
Click [Data Warehouse], the activated devices are shown in the page.
IV. Login APP (standard version and above)
a Download and install the “123 IoT OPP”.
b Open the APP and input the server, account and password. The server address must be the server address+port, such as 192.168.2.34:80.
I. Installation
i.Install UbiBotOPP
a Double click “UbiBotOPP Setup”.
b Select setup language, click [OK].
c Confirm the installation path, the default installation path for the programme is "C:\UbibotOpp", then click [Next].
d Set the server port, then click [Next].
e Select additional tasks and click [Next].
f Click [Install].
g Click [Finish].
ii.Privatization Environment Parameter Setting
a Open the browser and go to http://127.0.0.1/.
b Upload the license which download in the App Center, click [Next].
After the upload, the key information will be shown on the page.
c If no special setting is needed, please click [DB Link Test] to check whether the database is connected. Click [Next].
Note: [Reset database] will clear the original database, please operate with caution.
After click [Reset database], please click [DB link test] again to confirm the database link is successful.
d Set website related information, you can set the name, logo and background image. Click [Next].
e Set the system setting like default timezone, language, account, etc.
f If you need to use the email alert function (not supported in the free version), please set up the Mail Server Settings (server for sending alert emails). Click [Finish], then it will jump to the console platform.
Please check with the mail service provider you are using for the relevant settings. Here is an example, the relevant settings are as follows.
II. Activate the device
i.Install the CH340 driver
a Double click “CH341SER”.
b Click [Install].
ii.Install PC Tool
a Double click “PcToolsIO Setup”.
b Click [Install].
c Click [Finish].
iii.Activate device
Please ensure that the device to be activated is not bound. If not, restore the factory setting of the device first.
a Double click PC Tool.
b Connect the device to the computer with a USB cable.
c Click [Server Setup].
d Click [Start].
e Enter the host, port and backup IP, then click [Next].
- Host: the host name set in the key.
- Port: 80(default). If the port has been modified, please fill in the new port number.
- Backup IP: the IP address set in the key.
f WiFi setup. Choose the network, set the Network SSID and password, then click [Start Setup]. After the setup, the device will be shown in the console platform.
III. Login the console platform
Access http://127.0.0.1/ (local server only) or the specified host address, such as http://192.168.2.34.
The username and password are set in the system settings.
Click [Data Warehouse], the activated devices are shown in the page.
Note: If you need to bind the device again after deleting it, restore the factory setting of the device first.
IV. Login APP (standard version and above)
a Download and install the “123 IoT OPP”.
b Open the APP and input the server, account and password. The server address must be the server address+port, such as 192.168.2.34:80.